BOX57-CPE19:
:
AntenaBox with integrated 19dBi antenna in 5GHz band. :
:• Boxed panel antenna for 5GHz band
:• Ideal for Client stations
:• Compatible with RB133/133c/411
:• Weatherproof and lightweight
:• Horizontal or Vertical polarization
:• Easy to mount
:
Specifications::
Freq. Band: 5200 - 5800 MHz
Gain :18.5dBi +/- 0.5dBi
Polarization: Vertical or Horizontal
VSWR: < 1.5
Connector: RPSMA Jack
Pigtail: RPSMA-IPAX Included
Dimensions: 20 x 21 x 8 cm
Mounting Mast: 30 - 50mm
:
:• Screw down four distancers and pigtail on metal plate
:• Connect IPAX end of pigtail on mini PCI card
:• Fasten board on distancers with four screws
:• Put metal plate in a box and connect required cables
:• Close a box with included plastic cover and fasten on the one side with three screws
:• Fasten mast holder on the other side of the box and the device is ready for mast mounting.

Descriere:
Antenna is under the metal plate. There is an arrow that indicates polarisation. You can rotate the plate to get vertical or horizontal polarization. Do it before putting the plate in the box! We recomend you to use the power over ethernet injector to avoid using two cables.

Pret(cu TVA):
84.00 Lei

Energy- profit:: 14dBi
VSWR: 1,5:1 :
Polarization: : : vertical
The angle of radiating: :
:14 degrees in horizontal
:14 degrees in vertical
Frequency: :2400-2485 MHz
Dimensions:: 180x270x100mm
:
Contine : :
:Cutie 180x270x100mm
:Panel antena 14 dbi
:Pigtail cu RP SMA mama
:Colier prindere (pe teava de 1.5 toli)
:Presetupa

Descriere:

Pret(cu TVA):
80.00 Lei

Dimensiuni:
Exterior:
:28.5cm x 23cm x 9.5cm
Interior:
:25.5cm x 20cm x 7.5cm
:
Pachetul contine :
:1 x Cutie Aluminiu 5 gauri
:1 x Tabla pentru montare RB 411/433/600
:1 x Presetupa
:2 x Kit Montare
:2 x Bride U
:4 x M4 x 8mm surubui pentru RB
:4 x M4 x 8mm surubuiri pentru kitul de montare
:4 x M3 X 6mm alte surubui pentru prindere tabla

Descriere:
Hinged Die Cast Aluminum Enclosures este proiectat pentru o viaţă lungă în medii în aer liber. Este vopsita pentru a oferii rezistenta la coroziune. Kiturile si suruburile sunt galvanizare.
Aceasta carcasa de aluminiu este recomndata pentru RouterBoard Mikrotik 411 / 433 / 600

Pret(cu TVA):
125.00 Lei

Contine :
:Carcasa Plastic Outdoor
:Antena Panel 14 Dbi
:Pigtail rpSMA

Descriere:
Polarizare: http://www.stationbox.info/SB_antennas_polarization.pdf StationBox is a universal enclosure designed for outdoor installations. One of the StationBox’s main advantages is its universality and applicability for different kind of devices and antennas from different suppliers. After mounting all components look like one entity. The StationBox is made of durable plastic and it consists only of 4 parts. StationBox is ready for the installation of the most popular types of PCB AP/Router boards from different suppliers. The boards are installed to the StationBox by using the part "base" and "spacers". The "base" includes prepared holes for different PCBs. The picture shows the installation of PCB RouterStation from UBNT. Variable pannel is not displayed in order to make the picture easy to understand.

Pret(cu TVA):
106.00 Lei