BOX57-CPE19:
: AntenaBox with integrated 19dBi antenna in 5GHz band.
: :• Boxed panel antenna for 5GHz band
:• Ideal for Client stations
:• Compatible with RB133/133c/411
:• Weatherproof and lightweight
:• Horizontal or Vertical polarization
:• Easy to mount
: Specifications:: Freq. Band: 5200 - 5800 MHz
Gain :18.5dBi +/- 0.5dBi
Polarization: Vertical or Horizontal
VSWR: < 1.5
Connector: RPSMA Jack
Pigtail: RPSMA-IPAX Included
Dimensions: 20 x 21 x 8 cm
Mounting Mast: 30 - 50mm
: :• Screw down four distancers and pigtail on metal plate
:• Connect IPAX end of pigtail on mini PCI card
:• Fasten board on distancers with four screws
:• Put metal plate in a box and connect required cables
:• Close a box with included plastic cover and fasten on the one side with three screws
:• Fasten mast holder on the other side of the box and the device is ready for mast mounting.
Descriere: Antenna is under the metal plate. There is an arrow
that indicates polarisation. You can rotate the plate to
get vertical or horizontal polarization.
Do it before putting the plate in the box!
We recomend you to use the power
over ethernet injector to avoid using
two cables.
BOX57-CPE19:
: AntenaBox with integrated 19dBi antenna in 5GHz band.
: :• Boxed panel antenna for 5GHz band
:• Ideal for Client stations
:• Compatible with RB711 MMCX
:• Weatherproof and lightweight
:• Horizontal or Vertical polarization
:• Easy to mount
: Specifications:: Freq. Band: 5200 - 5800 MHz
Gain :18.5dBi +/- 0.5dBi
Polarization: Vertical or Horizontal
VSWR: < 1.5
Connector: RPSMA Jack
Pigtail: RPSMA-MMCX Included
Dimensions: 20 x 21 x 8 cm
Mounting Mast: 30 - 50mm
: :• Screw down four distancers and pigtail on metal plate
:• Connect IPAX end of pigtail on mini PCI card
:• Fasten board on distancers with four screws
:• Put metal plate in a box and connect required cables
:• Close a box with included plastic cover and fasten on the one side with three screws
:• Fasten mast holder on the other side of the box and the device is ready for mast mounting.
Descriere: Antenna is under the metal plate. There is an arrow
that indicates polarisation. You can rotate the plate to
get vertical or horizontal polarization.
Do it before putting the plate in the box!
We recomend you to use the power
over ethernet injector to avoid using
two cables.
Energy- profit:: 17dBi
VSWR: 1,5:1
Polarization: :vartical and horizontal
The angle of radiating:: :14 degrees in horizontal
:14 degrees in vertical
Frequency: :2400-2485 MHz
Dimensions:: 200x200x15mm
Descriere: N female connector on rear side of antena makes popssibility for connection with wireless card by pigtail.
Antenna can be mount on the mast - in vertical or horizontal polarity.
Energy profit: : :22dBi - with 60cm dish
:24dBi - with 70cm dish
: Polarization: : :- vertical (connector on left or right)
:- horizontal (connector on top or bottom)
: Band: 5400-5700 MHz
Impedance :50 Ohm
Connectors socket: N
Dimensions:: length 90mm, diameter 40-55mm
Mounting diameter:: 40 mm Weight 0,3 kg
Model :ANT5700D23A 5.7GHz 23.5dBi
Frequency Range :5470-5725 MHz
Bandwidth: 255 MHz
Gain :23 dBi
Horizontal Beamwidth: 10º
Vertical Beamwidth: 13º
F/B Ratio :20 dB
V.S.W.R :1.5
Nominal Imdedance :50
Polarization: Vertical or Horizontal
Max. Power: 100 W
Connector: N female
Dimension: 0.3x0.4 m
Weight: 1.4 kg
Rated Wind Velocity: 60 m/s