| Features
| |
| | 802.3af 48V compatible
|
| | Gigabit Ethernet Switch (4 ports)
|
| | 128MB RAM
|
| | 16MB Flash
|
| | USB 2.0 Support
|
| | SDIO Support
|
| | 680MHz CPU (Option to overclock to 800)
|
| | Robust ESD/Surge Protection for Industrial Applications
|
| | Support for 3 Ubiquiti SR,XR,or SR71 radios
|
| | Built in dB9 connector
|
| | Easy Access to full GPIO signals
|
|
| |
| Specifications
| |
|
| |
| Pro Version Enhancements:
| |
|
| |
| | 48V 802.3af Power Over Ethernet
|
| | 4-Port Gigabit Ethernet Switch
|
| | 128MB RAM
|
| | On Board SDIO Support
|
| | On Board, USB2.0, RS232/dB9
|
| | On Board DC power jacks
|
|
| |
| Overall system configuration
| |
|
| |
| | CPU Atheros AR7161 MIPS 24K running @ 680MHz
|
| | MEMORY DDR 128MB
|
| | FLASH SPI 16MB
|
| | 4-Port Gigabit Ethernet Switch
|
| | Three MINI-PCI Slots supports Type IIIA
|
| | USB 2.0 Host
|
| | Built in RS232/dB9 Connector
|
| | SDIO
|
| | On board Real Time Clock "RTC"
|
| | DC Power Jack
|
| | 802.3af 48V compatible
|
|
| |
|
| |
| Power Supply Range 40VDC to 56VDC
| |
|
| |
| | Using Higher voltage is recommended since it will use lower current
|
| | Typical Power Consumption is 3W idle no radios present
|
| | 5W idle One Radio present
|
| | 7W while passing 1000Mbps traffic
|
| | Single RJ45 "J1" is for WAN and 802.3af compatible Power Over Ethernet
|
| | Supports high power POE up to 25W
|
|
| |
|
| |
| Ethernet Interface
| |
|
| |
| | J1 Single WAN port 10/100/1000
|
| | J2 Tripple LAN Port 10/100/1000
|
| | 2 RGMII Ethernet Logical Ports to Ethernet Phy Switch -
|
| | 1 RGMII port for WAN Port
|
| | 1 RGMII port for LAN Ports
|
| | Ethernet Phy switch, Atheros AR8316
|
|
| |
|
| |
| Real Time Clock "RTC" Interface
| |
|
| |
| | RTC Interface shares the SPI bus with the on board FLASH
|
| | Active high signal on SPI CS enables RTC, active low signal on SPI CS enables FLASH |
